微信营销
欢迎关注浦光仪表微信公共帐号
1扫描以上二维码2加微信号:

Mail| Chinese| English|Map|Disclaimer

introduction

introduction

UQK - 01 liquid level switch

Security code: No
browse:
add time: 2016-11-08 09:49:19
recommendation:

Buy join the shopping cart

UQK - 01, UQK - 02, UQK - 03 type float level controller is suitable for the control of all kinds of the liquid of the liquid in the container, when the liquid level to the upper and lower switch value, the controller contact signal on-off switch type.The products are divided into two types: regular and explosion-proof type, explosion-proof type can be used for flammable and explosive medium with A magnitude of 1.2, A, B and C group of level control of the pressure vessel.Change does not apply to the brass ball float liquid level controller, the material such as stainless steel has strong corrosion effect and magnetic impurities in the medium.

Model name

Medium pressure

Medium temperature (℃)

Switch poor (mm)

Setting way

Type of installation

The power and contact capacity and life

UQK-01

1.0 MPa


150 ℃

10 or less

Do not adjust

The level of

Communication: 220 v / 1.5 A, 110 v / 2.5 A
Dc: 24 v / 2.5 A, 240 v / 0.5 A
Life: 5 x 100 ^ 2

UQK-02

1.0 MPa

25 ~ 550

Level is adjustable

The level of

UQK-03

1.0 MPa

8 ~ 1000

Stepless adjustable

vertical





Second, the working principle of the ball float liquid level controller installation method and installation schematic diagram:
1. UQK - 01, UQK - 02, UQK - 03 type ball float liquid level controller using non-standard convex flange connected to accused of container, users should configure corresponding when install docking flange (flange) B (see below)
2. UQK - 01, UQK - 02 type ball float liquid level controller for horizontal installation, UQK - 03 type ball float liquid level controller for the vertical installation (see below), flange (B) for the accused of container with (A) of the flange of non-standard fittings, users according to the pie chart size corresponding configuration.

3. UQK - 02 type ball float liquid level controller action range setting is the step adjustment, the biggest action range is 550 mm.Action range adjustment method: adjust the fan lever on the upper and lower the relative position of two positioning screw (change the floating ball swing radius) can be realized.
4. UQK - 03 type ball float liquid level controller in the installation, because of the floating ball diameter is greater than the flange hole diameter, so the container cover should be can tear open outfit;
UQK - 03 type ball float liquid level controller action range setting is the stepless adjustment, with the largest scope of action for 1000 mm;Other length need to be custom-made.


on aFlange level transmitter
nextMagnetic flap side mounted level gauge
bottom.jpg
  • fax:021-51685578
  • mail:info@puguang.com
  • address:Zhabei District, Haining, Shanghai Road, No. 899, Changtai enterprise World Plaza, A building, 22 floors
link:BaiduSougou