KVVR, ZR - KVVR control cable

One, KVVR, ZR-KVVR control cable model, name and the scope of use (in which the ZR-KVVR for the flame retardant control cable)

KVVR

Copper conductor PVC insulated PVC sheathed control cable

Laying in the indoor mobile requirements soft and other occasions

ZR-KVVR

Copper conductor PVC insulated and sheathed flame retardant control soft cable

Laying in the requirements of the indoor mobile requirements of soft and other occasions

Two, the use of characteristics

The rated power frequency voltage Uo/U is 450/750V or 0.6/1kV.

The conductor - the maximum permissible operating temperature of 70 DEG C.

The cable laying temperature shall be not less than 0 degrees, if the ambient temperature is lower than 0 DEG C, with cable preheating.

The cable permissible bending radius are as follows:

Non armoured cable, not less than 6 times of cable diameter;

Armoured or copper tape shielded cable, not less than 12 times of cable diameter;

Shielded flexible cable should not be less than 6 times of the outer diameter of the cable.

Three, the scope of production

Model	Rated voltage	Nominal cross section of conductormm2
		1.0	1.5	2.5	4	6	10
		Core number
KVV	450/750V or 0.6/1kV	-	2～61				2～14	2～10
KVVP		-	2～61				2～14	2～10
KVVP2		-	2～61				2～14	2～10
KVV22		-	7～61		2～61		2～14	2～10
KVV32		-	19～61		7～61		2～14	2～10
KVVR		2～61					-
KVVRP		2～61				2～48	-
KVVP-22		-	2～61				2～14	2～10
KVVP2-22		-	2～61				2～14	2～10

Four, structure size

The copper core PVC insulated PVC sheathed control cable

（KVV）

Number of cores and nominal cross-section of conductormm2	Conductor structure	Insulation thickness		Sheath thickness		Approximate outer diameter of cable		Approximate weight of cable
	NO./фmm	mm		mm		mm		kg/km
	-	450/750V	0.6/1kV	450/750V	0.6/1kV	450/750V	0.6/1kV	450/750V	0.6/1kV
2×1	1/1.13	0.6	0.8	1.2	1.8	7.7	9.7	68	103
2×1	7/0.43	0.6	0.8	1.2	1.8	8.0	10.0	71	108
2×1.5	1/1.38	0.7	0.8	1.2	1.8	8.6	10.2	87	119
2×1.5	7/0.52	0.7	0.8	1.2	1.8	8.9	10.5	94	124
2×2.5	1/1.78	0.8	0.8	1.2	1.8	9.8	11.0	120	148
2×2.5	7/0.68	0.8	0.8	1.2	1.8	10.3	11.5	127	157
2×4	1/2.25	0.8	1.0	1.2	1.8	10.7	12.7	158	205
2×4	7/0.85	0.8	1.0	1.2	1.8	11.3	13.3	166	215
2×6	1/2.76	0.8	1.0	1.2	1.8	11.7	13.7	207	258
2×6	7/1.04	0.8	1.0	1.2	1.8	12.4	14.4	216	269
2×10	7/1.35	1.0	1.0	1.5	1.8	15.7	16.3	353	374
3×1	1/1.13	0.6	0.8	1.2	1.8	8.0	10.1	83	122
3×1	7/0.43	0.6	0.8	1.2	1.8	8.4	10.4	87	127
3×1.5	1/1.38	0.7	0.8	1.2	1.8	9.0	10.6	109	143
3×1.5	7/0.52	0.7	0.8	1.2	1.8	9.4	11.0	113	149
3×2.5	1/1.78	0.8	0.8	1.2	1.8	10.3	11.5	153	183
3×2.5	7/0.68	0.8	0.8	1.2	1.8	10.8	12.0	162	193
3×4	1/2.25	0.8	1.0	1.2	1.8	11.3	13.4	206	259
3×4	7/0.85	0.8	1.0	1.2	1.8	11.9	14.0	215	270
3×6	1/2.76	0.8	1.0	1.5	1.8	13.0	14.5	292	332
3×6	7/1.04	0.8	1.0	1.5	1.8	13.8	15.2	302	344
3×10	7/1.35	1.0	1.0	1.5	1.8	16.6	17.2	467	490