90 ℃ motor winding is soft cable (wire) 90 ℃ motor winding is soft cable (wire) 90 ℃ motor winding is soft cable (wire)
This product applies continuous operating temperature of conductor is 90 ℃ of motor winding for lead wire
A, production standards
JB6213.3—1992
Second, the conditions of use
1, run continuously the highest temperature of conductor is 90 ℃
2, when laying allowed bending radius should not less than four times the cable (wire) diameter
Third, the model name
Type no. | The name says |
JE | Copper ethylene-propylene rubber insulation motor winding is connect the cable (wire) |
JEH | Copper ethylene-propylene rubber insulation chlorosulfonated polyethylene sheath motor winding is connect the cable (wire) |
JEM | Copper ethylene-propylene rubber insulation chlorine ether leads connect cable sheath motor (wire) |
JH | Copper chlorosulfonated polyethylene insulation motor winding is connect the cable (wire) |
E - ethylene propylene rubber H - chlorine polyethylene sulfide M - chlorine ether word set
Fourth, the specifications of the wire and cable
Type no. | Rated voltage (V) | Number of cores | Nominal section (was) |
JE | 500 | 1 | 0.3 ~ 10 |
JEH | 0.3 ~ 120 | ||
JEM | |||
JH | 0.3 ~ 10 | ||
JE | 1000 | 1 | 0.3 ~ 240 |
JEH | 0.5 ~ 120 | ||
JEM | |||
JH | 0.2 ~ 240 | ||
JE | 3000 | 1 | 2.5 ~ 240 |
JEH | 2.5 ~ 120 | ||
JEM | |||
JH | 2.5 ~ 240 | ||
JE | 6000 | 1 | 16 ~ 240 |
JEH | |||
JEM |