Mail
Chinese
English
Magnetic help electric contact pressure gauge not only has the advantages of novel design and reliable in structure, variety complete, the action, the characteristics of good stability and strong adaptability, and a measurement and control and the advantages of small, simple installation and maintenance, therefore, it is no instructions, no switch generally poor adjustment and without the pressure setting device, the incomparable pressure measurement and control instrument.
Magnetic electric contact pressure gauge type marking
- | Other functions;F - corrosion;Z - seismic;FZ - corrosion resisting earthquake and pressure system and housing materials;Stainless steel |
B- | Instrument nominal diameter and form; |
- | In 100, 150 respectively 100, 150 mm diameter to type After 102 indicates a diameter of 100 mm radial BianShi 103, 153 respectively 100, 150 mm diameter axial built-in type |
□- | A - suitable for ammonia and its mixture G - with isolation device |
C | Contact device form magnetic acting type |
X | Control mode;Go slow contact type form |
Y | Instrument categories: pressure instrument |
Magnetic help electric contact pressure gauge main technical index function
Scale range, accuracy grades, and joint thread size
type | model | The name of the (including the full name or abbreviation) | Scale range of MPA | Accuracy grades | Joint thread (size) | ||
instructions | The set value | ||||||
Through to | Disconnect the | M20×1.5 （*G3/8＂） （*G1/2＂） | |||||
ordinary | YXC-100 *YXC-102 YXC-103 | Magnetic electric contact pressure gauge | 0 ~ 0.16 to 60 and 0.1 ~ 0.06 to 2.4 series 0 ~ 0.1 to 60 and 0.1 ~ 2.4 series | 1.6 | 1.5 | 4 | |
YXC-150 *YXC-153 | |||||||
special | YXCA-150 | Magnetic electric contact ammonia pressure gauge | 0 ~ 0.16 to 60 and 0.1 ~ 0.06 to 2.4 series | 2.5 | 2.5 | 4 | |
resistant | YXC-100-Z *YXC-102-Z YXC-103-Z | Magnetic electric contact pressure gauge | 0 ~ 0.6 to 60 and 0.1 ~ 0.5 to 2.4 series | 1.6 | 1.5 | 5 | |
The corrosion type | *YXC-100-F *YXC-102-F *YXC-150B-F *YXC-152B-F *YXC-153B-F | 0 ~ 0.16 to 60 and 0.1 ~ 0.06 to 2.4 series | 1.6 | 1.5 | 4 | ||
Corrosion resistant | *YXC-100-FZ *YXC-102-FZ *YXC-150B-FZ *YXC-153-FZ | 0 ~ 0.6 to 60 and 0.1 ~ 0.06 to 2.4 series | 1.6 | 1.5 | 5 | ||
Isolation of ordinary Isolation type corrosion resistant type | YXCG-103 *YXCG-103-F | Isolation type magnetic electric contact pressure gauge | 0 ~ 0.16 to 60 and 0.1 ~ 0.06 to 2.4 series | 1.6 | 1.5 | 4 | M24×2 1 （*G1/4＂） |
Seismic isolation type type | YXCG-103-Z | 0 ~ 0.6 to 60 and | 1.6 | 1.5 | 5 | ||
Isolation type corrosion resistant | *YXC-103-FZ | 0.1 ~ 0.5 to 2.4 series | |||||
Marked with "*" type temporarily limited to special order
Isolation of soft tail length for 1, 2, 3, 4 m (2 m for optimum length)
Contact device electrical parameters and control form
Contact power | The highest working voltage | Maximum working current | Control form |
30 the va (impedance load) | 220 vd. A. C or 380 C | 1A | Up and down limit, upper limit of double, double floor first |
Note;When the current is 1 a.Working voltage should be lower than 40 v.
Using the environment conditions
type | Working temperature range Medium;The surrounding environment | Relative humidity | Vibration resistance | |
Common sex and specificity | - 40 ~ 70 ℃ | No greater than 85% | V.H. level 3 | |
The corrosion resistance | - 25 ~ 55 ℃ | No greater than 90% | V.H. level 3 | |
Vibration mode resistance, corrosion resistance to vibration | V.H. level 4 | |||
Isolation type type | Under 150 ℃ | - 40 ~ 70 ℃ | V.H. level 3 | |
Isolation type corrosion resistant type | - 40 ~ 70 ℃ | |||
Isolation type to other type | Under 150 ℃ | - 25 ~ 55 ℃ | V.H. level 4 | |
Temperature effect;Value is not greater than 0.4% / 10 ℃ (20 + / - 5 ℃ temperature deviation)
The magnetic structure of electric contact pressure gauge
Instrument by measuring system, indicator system, magnetic electric contact device, housing, adjustment device and junction box (socket), etc.
Instrument working principle is based on the measurement system of bourdon tube under the action of the pressure of tested medium, after the end of spring tube to produce a displacement of the corresponding elastic deformation with rod and to amplify the transmission gear transmission mechanism, the fixed gear on the instructions
