Magnetic level gauge turning

UHZ series magnetic flap side mounted liquid level meter, it is our company introduction, absorption of similar foreign products, and absorption, digestion, improve, promulgated by the former ministry of chemical industry of magnetic level gauge standard HG/T21584-95 the development and production of products.Can be used for all kinds of tower, tank slot, spherical vessel and boiler equipment such as medium level detection.The series magnetic level gauge can achieve high sealing, leakage protection and adapt to high pressure under the condition of high temperature, corrosive liquid level measurement, has reliable security, it makes up for the glass plate (pipe) level gauge instructions are not clear, the lack of easy broken, not affected by high and low temperature change, do not need the combination of multiple level gauge.Measure without blind area, the whole process that smart, intuitive readings, and the measuring range is big.Especially the instructions, in part due to no direct contact with the liquid medium, so the high temperature and high pressure, high viscosity, poisonous and harmful, strong corrosive medium, more show its superiority.As a result, it than the traditional glass tube, plate level gauge has higher reliability, security, advanced, practical.Side mounted magnetic double column is the most significant characteristics of liquid level meter liquid medium with indicator is completely isolated, so in any case are very safe, reliable and durable, deserve to go up and various types of liquid level meter liquid level alarm, control switches, and implementation level or the position of the upper and lower limit offside alarm, control or chain;Or with static pressure type fluid shift delivering reed - resistance type liquid level transmitter, liquid level can be, the position signal into two wire standard 4-20 madc signal, realizes the remote indication, test, record and control.This series of magnetic flap side mounted level meter can be widely used in electric power, petroleum, chemical metallurgy, environmental protection, Marine, construction, food and other industries the level measurement and control in the process of production.
Technical parameters:
When measuring range: 300 ~ 15000 mm
Low accuracy: + / - 5 mm, plus or minus 10 mm
Low double column diameter: 10 mm, 16 mm
Low working pressure: 2.5 Mpa or less (more than 2.5 Mpa juice) can be set separately
Anti-corrosion type acuities were 0.6 Mpa
Low medium density: acuity 0.45 g/cm3
Low medium density difference: acuity 0.15 g/cm3 (measuring the position)
Low medium temperature: + 250 ℃ ~ 20 ℃ (special requirements of up to 450 ℃)
Low viscosity of medium: 0.4 Pa s., or less for the viscosity of the medium or temperature
Low medium of goods, can use according to user requirements
With heating jacket type liquid level juice.
25 hz or less low environmental vibration: frequency, amplitude of 0.5 mm or less
Low following speed: 0.08 m/s or less
Low flange size: our factory factory DN25, PNl. 0 (metric system)
Low even by the flange: using chemical latest promulgated in 1998
HG20592 ~ 20635-20635 standard flange, if
With other flange standards (GB, ANSI, DIN, etc), please remark when users in order.
For high voltage side type magnetic level gauge flange connecting the HG20595-97 with butt welding neck flange DN25, PN6.0 or PNl0Mpa, sealing surface form or convex surface, if you have special request can be made in order.