Top mounted magnetic flap liquid level gauge

Top mounted magnetic level gauge is turning should be centralized control and the development of another top (bottom) type products, scene with clear instructions and can remote control, etc. The products can be widely used in petroleum chemical industry, fertilizer, pharmaceutical, Marine, military and other industries of all kinds of tajikistan, cans, and the spherical liquid level indicator on the container.
The main technical indicators:
Top with magnetic flap liquidometer technical requirements
Measuring range: 0 ~ 5000 mm
Accuracy: + / - 10 mm - 16 mm
Double column diameter: 10 mm, 16 mm
Nominal pressure: 2.5 MPa
Medium density: 0.7 g/cm3 or special requirements (up to 0.45 g/cm3)
Medium temperature: - 20 ~ + 350 ℃
Answer the liquid material: 304/316/316 l stainless steel and PP material
Medium viscosity: 2.0 or less Pa. S
Environment: vibration frequency of 25 hz or less amplitude of 0.5 mm or less
Follow the speed of semen: 0.05 m/s or less
The flange standard: HG20592 ~ 20635-20635
Alarm, remote transmission device: the technical parameters and UHZ - 25 series are the same.
Top with magnetic flap liquidometer works:
The top mounted magnetic flap liquid level gauge by ontology (composed of upper and lower tube), frame box (consists of red, white double color small magnetic flap), float (composed of magnet, plunger, buoy) and liquid level transmitter and so on, its structure as shown.Working principle is: the container of the buoy (according to different medium and the pressure for development), along with the change of liquid level height in the next two catheter floating up and down and through the plunger, the magnet on the intraductal move up and down, pushing outside the body turning and turning red, white color to indicate that the liquid level height, at the same time, liquid level transmitter will level signals to the control center for level indicator and control, also can undertake centralized monitoring through the computer.
1, in open hole on the side of the container is not appropriate, and the container around less space, can install in the container to the upper or lower level gauge this form
2, can be used for a wide viscosity liquid medium
3, a display observation direction can be arbitrary change
4, and other features and UFZ characteristics are the same.
Choose information:
1, anti-corrosion type, nominal pressure 1.0 MPa or less.
2, level gauge has certain blind spots, so should be combined with blind area while reading level of value compensation (this factory level meter factory, the scale dial zero to actual values).
3, level gauge measurement range is less than 5 meters, otherwise affect liquid level meter is stable and reliable, fastness, etc.
4, the installation of connecting flange, and the level of commonly used tu factory dimensions reference (HG21592-97).
Installation and maintenance:
1, level gauge tube and body tube must be kept vertical
2, cannot bend, connecting rod must be straight inserted
3, after the installation, to monitor the double column with magnetic steel leads a zero or more show white, zero the following red.