Electric heat tracing magnetic flap liquid level gauge

Electric heat tracing magnetic level gauge, turning frost prevention type magnetic flap, clip model level gauge, is suitable for low temperature to high temperature, vacuum to various environment, such as high pressure oil, chemical and other industries ideal level measurement products.Depending on the installation position in the container, and provide lateral loading and top two forms.According to the working medium is different, for stainless steel and ABS, PP - R engineering plastic three kinds of materials, including ABS, PP - R material suitable for acid, alkali and other corrosive medium.Features: float as measuring element, magnetic drive double column shows that no energy.With the lower limit switch output, which can realize remote alarm, limit control.With transmitter can realize water distance instruction, detection and control.The main technical indicators: installation form content Side mounted the top mounted installation space (measuring range), stainless steel 500 ~ 5000 (500 ~ 2500 mm) (mm), ABS, PP - R 500 ~ 4000 (mm) work pressure 0.6, 1.6, 2.5, 4.0 MPa, 0.6, 1.6, 2.5 MPa medium density > 0.6 g/cm3 > 0.76 g/cm3 1 cr18ni9ti subject material, ABS, PP - R (work pressure 0.6 MPa) medium temperature - 40 ~ 100 ℃ (ABS, PP - R: - 40 ~ 80 ℃) - 40 ~ + 70 ℃ environment temperature value error of plus or minus 10 mm medium sticky side mounted clip model magnetic level gauge company turning heat system, suitable for freeze protection, thermal insulation and heating liquid level measurement, jacketed type steam jacket, water jacket, vacuum jacketed clamp, electricity and so on.According to the scene for explosion-proof electric heat tracing system.
Type selection
Steam jacket and water jacket: it is in the level increase a layer of cylinder body tube, for steam, circulating water or heat conducting oil distribution;
Vacuum jacketed: is to increase a layer of outside the gauge body tube vacuum cylinder, so that the measured medium heat with the outside world;
Electricity jacket, is in the level outside the main body tube electric tracing heat coil winding, electricity to the heating medium;
Users can according to the requirements of the project, cooperate with remote transmitter use, can be realized on the digital display, as well as the standard of 4 ~ 20 ma output far eastone electrical signals, to match the recording instrument, or the needs of the industrial process control.Can also be used with magnetic control switch or close to switch, etc, the liquid level monitoring alarm and control into the liquid equipment.
Suitable for all kinds of liquid container liquid level, the position of the measurement and control.Clearly indicates that the height of liquid level, direct display striking, indicator and completely isolated storage tank, the use of safe, reasonable design, simple structure, convenient installation and reliable, stable performance, long service life, low maintenance cost, easy installation and maintenance, etc.
Technical parameters
Measuring range: 150 ~ 8000 mm, the center distance of more than 8000 mm or far lose conditions are not allowed to exceed the length of the liquid level meter can be used segmented manufacturing.
Working pressure: 2.5 MPa
Working temperature: c15 UHZ - 517: - 20 ~ 100 ℃
UHZ-517C15A:-30～100℃
Accuracy: + / - 10 mm
Medium density: 0.5 ~ 2.0 g/cm3
Environment: vibration frequency of 25 hz or less amplitude of 0.5 mm or less
Follow the speed: 0.08 m/s or less
Medium viscosity: Pa 0.4 or less) s for the viscosity of the medium or low temperature, easy to be crystallized media can choose heating model level gauge
Process connections: bypass the side flange: DN25, PN1.0 or PN1.6, PN2.5 convex
The flange standard: HG20592 ~ 20635-97 other flange standard user, please note.