Silicone rubber insulated and sheathed flexible control cable

A, product characteristics and USES
This product is fit for ac rated voltage up to and including 450/750 mobile or fixed installation with electrical instrumentation cables or signal transmission, cable has good thermal stability, can in the high temperature, cold environment, corrosive to keep good performance and softness, suitable for metallurgy, electric power, petrochemical and mobile equipment manufacturing and other industries with the mobile and heat-resistant anti-corrosion and other special requirements.
Second, the product standards
Q/ZS2003-10;Flame retardant fire-resistant performance test execution GB12666-90 standard
Three, use features
1, ac rated voltage U0 / U 450/750 v.
2, the highest working temperature conductor: 180 ℃;
3, the lowest temperature: silicone rubber sheath: fixed installation to 60 ℃ the fixed installation - 20 ℃;
4, the bottom of the cable temperature should not be installed less than 25 ℃.
5, cable allows bending radius: the armoured cable minimum 6 times of cable diameter.
Four, basic types and names

Note: 1, if you need flame retardant silicone rubber cable, type before adding ZR;
Nitrile sheath 2, silicone rubber insulated cables in some more, the case of large cross section instead of silicone rubber insulated and sheathed heat control cable, applicable conditions similar to silicone rubber sheath cable, long-term use of temperature of 60 ℃ - 105 ℃;
3, conductor wire core wire can be used in the tin.
Five, the code name and meaning

Six, main technical index
1, the finished cable conductor dc resistance (the prescribed GB3956);
2, when 20 ℃ insulation resistance should not less than 500 m Ω/KM;
3, the finished cable through ac 50 hz 2.5 KV / 5 min is not breakdown voltage test.